Residential window products
Single hung, fixed, sliding and casement windows, available in large missile impact (LMI) and small missile impact (SMI) versions.
LMI = large missile impact. SMI = small missile impact. HS = heat strengthened. NOA = Notice of Acceptance.
Specifications by model

Single hung window
ES 1000 - ES 1100
Large missile impact
- Glass on glass: (1/8" HS + 0.090 PVB + 1/8" HS)
- Dade County Notice of Acceptance 06-0316.02
- Design load (ASTM E330): + 80.0 psf; -90 psf
- Water infiltration: 10.5 psf
- Maximum size tested: 53 1/8" x 63"
- Another glass option tested
- Maximum size approved in NOA: 42" x 74 1/4" (equal lites)
- Tested by FTL (Fenestration Testing Laboratory Inc., Hialeah, FL)
- Unequal lites (oriel) approved
- Block & Tackle and Ultra lift balances
Small missile impact
- Glass on glass: (5/32" HS + 0.090 PVB + 5/32" HS)
- Dade County Notice of Acceptance 06-0316.03
- Design load (ASTM E330): + 80.0 psf; -120 psf
- Water infiltration: 12 psf
- Maximum size tested: 53 1/8" x 74 1/4"
- Block & Tackle and Ultra lift balances
- Tested by HETI (Hurricane Engineering & Testing Inc., Miami, FL)
- Maximum size approved in NOA: 53 1/8" x 74 1/4" (equal lites)
- Unequal lites (oriel) approved

Fixed window
ES 1500 - ES 1600
Large missile impact
- Glass on glass: 3/16" HS + 0.090 PVB + 3/16" (glass option depends on window size)
- Dade County Notice of Acceptance 06-1201.05
- Design load (ASTM E330): + 70.0 psf; -90 psf
- Water infiltration: 15 psf
- Maximum size approved: 36" x 120"
- Maximum size approved in NOA: 42" x 74 1/4" (equal lites)
- Tested by FTL (Fenestration Testing Laboratory Inc., Hialeah, FL)
- Architectural available
Small missile impact
- Glass on glass: 3/16" TEMP + 0.090 PVB + 3/16" HS (glass option depends on window size)
- Dade County Notice of Acceptance 05-1213.01
- Design load (ASTM E330): + 100 psf; -140 psf
- Water infiltration: 15 psf
- Maximum size approved: 36" x 120"
- Tested by HETI (Hurricane Engineering & Testing Inc., Miami, FL)

Sliding window
ES 2000 - ES 2100
Large missile impact
- Glass on glass: (1/8" HS + 0.090 PVB + 1/8" HS)
- Dade County Notice of Acceptance 06-0316.05
- Design load (ASTM E330): + 70 psf; -90 psf
- Water infiltration: 10.5 psf
- Maximum size tested: 108" x 60" XOX
- Configurations: XO or OX, XOX
- XOX configurations are 1/3 - 1/3 - 1/3 or 1/2 - 1/4 - 1/2
- Depending on the configuration, sizes and loads may vary
- Another glass option tested
- Tested by FTL (Fenestration Testing Laboratory Inc., Hialeah, FL)
Small missile impact
- Glass on glass: (5/32" HS + 0.060 PVB + 5/32" HS)
- Dade County Notice of Acceptance 06-0316.04
- Design load (ASTM E330): + 82 psf; -108 psf
- Water infiltration: low standard 11 psf; high sill 12.3 psf
- Maximum size tested: 111" x 63" XOX
- Configurations: XO or OX, XOX
- XOX configurations are 1/3 - 1/3 - 1/3 or 1/2 - 1/4 - 1/2
- Depending on the configuration, sizes and loads may vary
- Another glass option tested
- Tested by HETI (Hurricane Engineering & Testing Inc., Miami, FL)

Casement window
ES 5000
Large missile impact
- Glass configuration: 1/8" HS + 0.090 PVB + 1/8" HS
- Miami-Dade County approved
- Design loads: + 85 psf / - 85 psf
- Water infiltration: 12.75 psf
- Maximum size tested: 74" x 63" XX
- Configurations: X, XX
- Four bar hinge
- Tested by FTL (Fenestration Testing Laboratory Inc., Hialeah, FL)
General specifications
Complete residential product line
- Single Hung LMI, SMI
- Sliding Window LMI, SMI
- Casement Window LMI
- Fixed Window LMI, SMI
- Architectural Windows, LMI, SMI
- French Door LMI
- Sliding Glass Door, LMI
- Mull Bars and Mull Clips (available to meet various design pressures)
Performance testing
- Passes Miami-Dade Protocols PA/TAS 201, 202, 203
- Passes Large and Small Impact Tests
- Passes ASTM E547/E331 water penetration
- Passes ASTM E283 for air leakage
- Operable windows pass AAMA 1302.5 and doors pass AAMA 1303.5 for forced entry resistance
- Deglazing test (ASTM E987)
- Uniform Design and Structural load test (ASTM E330)
Glazing
- All LMI products are silicone-glazed for greater strength and seal
- PVB and SGP interlayer available
- HS or annealed glass configuration available
Weather-stripping
- Fully weather-stripped with plastic fin, Q-LON and/or vinyl bulb
Screens
- Window and door screens are fitted at time of assembly to ensure a complete unit
- Aluminum frame, fiberglass mesh
NOAs and tests
- All products are Dade County approved
- Dade County NOA numbers are subject to change as renewals occur
- Test data available upon request
- All products are FBC approved
Frames
- Extruded aluminum with electrostatic paint, KYNAR 70%, wet and anodized
- Frame depth is 2.33" for windows, 4" for French door, 4.249" for sliding
- Nominal wall thickness is 0.062 for all windows and doors
- Flange-type for masonry or wood construction, or flush frames for concrete openings
- Corrosion-resistant hardware and fasteners with stainless steel options
- Window and door members are extruded from a minimum of 6063-T5 and/or 6063-T6 aluminum alloy
Options
- Applied muntins (flat or OG, interior and exterior)
- Popular glass tints
- Sizes: standard, modular and custom sizes take the same delivery time
- Finish: white, bronze, anodize. Ask your distributor for more PPG colors
- Blue Max protection available (one side or both)
- Flush frame adapter available for buckled installation